AC Installation in Irving, TX | Stallion AC Repair

AC Installation in Irving - Written Fixed Price, Set Install Date

We size the system with a proper load calculation rather than copying what was there, then give a written fixed price with the install date set. Rebate and financing paperwork handled for you.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate
Questions about your HVAC?Free estimate, price agreed before work starts
Call (866) 942-9965

Fast, Reliable AC Installation Across Irving

Replacing an air conditioner in Irving isn’t the same job it is in a newer suburb, and we plan every installation here with that in mind. Plenty of homes in this city were built before the first energy code touched a duct, and a system swap that ignores that history is a swap you’ll pay for twice. We know Irving street by street, from the older blocks near the airport to the newer towers over in Las Colinas, and we bring a load calculation and a duct check before anyone talks about tonnage. Call (866) 942-9965 and we’ll get your installation scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (866) 942-9965

Why Irving Homeowners Call Stallion AC Repair for AC Installation

We’ve built a strong local reputation in Irving by giving straight answers on repair versus replace instead of pushing whichever system has the higher ticket. When a 1970s split system finally quits, the honest question is whether the ducts and the panel can support a modern unit, and we’ve earned repeat trust here by answering that question truthfully before quoting anything. Our technicians have up to 12 years of experience, and they’ve worked across nine leading HVAC brands, so they recognize your existing equipment and its quirks before the first visit.

Irving is where the two sides of the metro meet. Rooftop package units on commercial builds and garden-style apartment complexes sit a few blocks from original single-family homes running ducts from a half-century ago, so we routinely read two very different service calls in the same week and the same neighborhood. Response times to Irving are quick because the whole corridor is familiar ground.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

HVAC Installation in Irving

HVAC Installation in Irving starts with measurement, not with a truckload of equipment. Before we set a new condenser, we run a room-by-room load calculation for the house, take static pressure readings on the existing air handler and ducts, and check the electrical panel for the capacity a modern system needs. In a slab-foundation home in 75061 still running its 1970s ductwork, this step is where the whole job gets decided. A typical HVAC installation in Irving runs $3,500 – $7,500, and the written estimate sets the final price.

Load Calculation First

North Texas summers push triple-digit heat for months, so an oversized unit is a real liability, not a safety margin. It short-cycles, pulls humidity poorly, and wears out faster. A proper load calculation matches the equipment to the house, the window orientation, and the insulation actually installed, not to whatever size the old unit happened to be.

Duct and Panel Checks

Original ducts in older Irving homes often leak a large share of their air straight into a 140°F attic, and a modern condenser pushing against that leak never reaches its rated efficiency. We test and seal or resize as needed. The panel check matters just as much: 1950s-70s homes regularly lack the service capacity a high-efficiency or heat pump system needs.

Heat Pump Installation in Irving

Heat Pump Installation in Irving means choosing one machine that has to carry both the cooling load and the occasional hard freeze. That’s a real design question here. North Texas heat is the year-round priority, but the February 2021 freeze showed what a cold snap does to heat pumps when exposed condensate lines and outdoor units aren’t protected. We size the system for summer demand and confirm it can hold heat through a cold event. Heat pump installation in Irving typically runs $3,500 – $7,500, with the written estimate setting the final price.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 942-9965

Sizing for Both Seasons

A heat pump is judged on its worst day, and in this climate the worst days come from opposite directions. We match capacity to the cooling load first, then confirm cold-weather performance and backup capability for the handful of deep freezes a decade brings.

Protecting the Outdoor Unit

Exposed condensate lines are a common winter failure point in Irving, and a freeze can leave a heat pump fighting ice instead of heating the house. Installation includes routing and protection so the system can ride out a hard cold snap without emergency calls.

Trusted Brands We Service in Irving

We’re trained on nine leading HVAC brands, including Carrier, Trane, Lennox, and Goodman, so we know your equipment before we arrive rather than learning it on your dime. That breadth matters in a city where one block holds premium carrier systems and the next holds value-tier Goodman units. We don’t stock parts on a truck or claim to, and that’s deliberate: what we bring is brand knowledge and fast turnaround, not a promise to have every component riding along. Whether you’re upgrading to a Trane or replacing an aging Goodman, we can recommend the right tier for your home and your budget instead of what’s easiest to sell. See our AC installation service for the full scope.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your HVAC?Free estimate, price agreed before work starts
Call (866) 942-9965

Common AC Installation Problems We See in Irving Homes

  • Like-for-like tonnage swaps that fail. A homeowner replaces a dead 3-ton unit with another 3-ton system and finds it short-cycles and never satisfies the thermostat. The cause is usually original ductwork leaking 30-40% of its air into a 140°F attic and a panel that can’t handle the new unit’s startup amps.
  • Panels without the capacity for modern equipment. Many 1950s-70s slab homes lack the service capacity a heat pump or high-SEER2 system needs, which shows up as nuisance trips or a required panel upgrade before installation.
  • Single-zone systems in unbalanced homes. Two-story and add-on floor plans run one zone through very different spaces, so a new unit runs constantly without ever fixing hot upstairs rooms.
  • Aging attic air handlers in tight closets. Older Irving homes tuck the air handler into undersized closets where airflow was marginal when it was built and worse now, so the equipment change alone won’t restore comfort.

Pricing for AC Installation in Irving, TX

Pricing here is set per job by the written estimate, and every estimate is free. The ranges below are typical for Irving and reflect the real work an older home often needs before equipment goes in. A straight equipment change costs less than a job that also requires duct sealing, resizing, or a panel upgrade, and we tell you which you’re facing before you commit. Here’s how the numbers usually land.

Service Typical Estimated Range
AC Installation (standard split system) $3,500 – $7,500
Heat Pump Installation $3,500 – $7,500
AC Repair (pre-install diagnostic) $150 – $650
Tune-Up (post-install verification) $80 – $200

What moves the number is the house, not the brand label. Duct sealing, a panel upgrade, or added returns push toward the upper end; a clean swap in a home whose ducts were already brought up to standard lands near the low end. Call (866) 942-9965 for a free estimate and a fixed price in writing.

We Also Serve Cities Near Irving

We work across the metro, so homeowners in Carrollton, Dallas, Grand Prairie, and Lewisville can reach us for the same installation service. We serve Irving and the surrounding communities, bringing the same load-calculation-first approach wherever we go. If you’re just outside the city line, call and we’ll confirm coverage.

Serving Irving, TX – Our Local Coverage Area

We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About AC Installation in Irving

Why Irving Chooses Stallion AC Repair

We set the standard for ac installation in Irving.

30-60 Min Response

Fast dispatch across Irving, 7am-7pm. Same-day service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irving

Getting your ac installation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your ac installation needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Irving - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local ac installation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Irving Customers Say

Trusted by homeowners across Irving and surrounding areas.

★★★★★

"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."

Robert Ziegler
★★★★★

"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."

Daniela Reyes
★★★★★

"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."

Veronica Delgado

Ready for AC Installation in Irving?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Irving.

(866) 942-9965

Request a Free Estimate in Irving

Tell us about your ac installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7