AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Irving
When the heat stops in an Irving house, you want a straight answer and a warm room. We handle furnace repair in Irving as a core service, with technicians who have up to 12 years of experience and know how these homes get put together. In a lot of Irving, that means original attic ducting and older panels, not a showroom install. Call (866) 942-9965. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Estimates are free and the price is set per job by the written estimate.
Why Irving Homeowners Call Stallion AC Repair for Furnace Repair
Irving is not one housing market. It’s two, sitting on the same street grid, and that shapes how we approach a furnace call. In the older post-war tracts around 75060 and 75061, we’re dealing with 1950s-70s slab homes that still run their original attic ducting. A few blocks toward the Las Colinas corridor, the calls come from apartment and condo units on rooftop package systems and newer office builds. Moving between a residential split system and a commercial unit in the same week is normal here, and it means a technician arriving at your door already has a working picture of what’s likely wrong.
That matters most on the older side of town, where a furnace that short-cycles or blows lukewarm air is often less about the furnace itself and more about the duct and panel behind it. We tell Irving homeowners what the diagnostic actually shows before anyone talks equipment. Repair or replace? You’ll get a straight answer, not a nudge toward the higher ticket. Our technicians are trained across nine of the industry’s leading brands, so they know the specific system in your closet before they arrive, not on your dime. That brand familiarity is half the job on a 25-year-old cabinet.
We also cover both sides of the equipment lifecycle under one roof: heating and cooling. Nobody wants to juggle a furnace contractor in January and a different one in July. One contractor for your furnace, your AC, and everything in between. If you’d rather browse the full scope first, our furnace repair team page lays it out.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Furnace Maintenance in Irving
Furnace Maintenance in Irving is worth scheduling before the first hard freeze, because North Texas winters aren’t gradual. The job covers a combustion test and heat exchanger inspection, igniter and flame sensor checks, blower motor amperage, filter and return-air review, and a static pressure reading that often tells the real story in these older homes. Typical furnace maintenance in Irving runs $80-$200 for a tune-up, and the written estimate sets the final price. A flat price, plus a written report of what was actually found. Our technicians aren’t paid on what they sell, so maintenance stays maintenance.
What a Tune-Up Actually Checks
The heat exchanger is the part that matters most on a 20-plus-year-old cabinet, and confirming it takes a combustion test, not a look. The igniter and flame sensor get checked for draw and condition. Blower motor amperage tells you whether it’s laboring, which is common in closets with little clearance.
When to Book It
Book before the heating season, and again if you notice short-cycling or a burner that sounds different than it used to. A maintenance visit is also the right moment to measure static pressure and see whether original attic ductwork is starving the furnace of return air.
Heat Pump Repair in Irving
Heat Pump Repair in Irving does real work here, because a heat pump has to carry both seasons: triple-digit summer heat and the occasional hard winter freeze, like February 2021, that strains the system and freezes exposed condensate lines. A heat pump in heating mode is a different animal from a gas furnace. There’s no flame, so diagnosis runs on refrigerant charge, reversing valve operation, defrost board behavior, and whether the backup heat strips are coming on when they should. Typical heat pump repair in Irving runs $150-$650, and the written estimate sets the final. A heat pump that blows cool air in January is usually one of three things: low charge, a reversing valve stuck mid-travel, or a defrost cycle that never terminates. The diagnostic tells you which.
Gas Furnace vs. Heat Pump
A gas furnace makes heat at the burner. A heat pump moves it, and its efficiency collapses as outdoor temperature drops, which is why backup strips matter in a North Texas cold snap. The failure modes look nothing alike, and testing one like the other wastes everyone’s time.
Defrost and Backup Heat
In freezing conditions the outdoor unit cycles into defrost, and if that cycle hangs up, ice builds and output drops. Backup heat that never engages is a control or sequencing issue, not a compressor issue.
Trusted Brands We Service in Irving
We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. The brand mix matters in Irving because the older single-family stock often runs aging single-stage furnaces from the premium lines, while value-tier equipment like Goodman and Rheem shows up in rentals and in newer builds. Knowing the specific cabinet tells a technician where to look first. We don’t stock parts on a truck or claim to; we diagnose, order what’s needed, and turn the repair around fast. Daikin and York systems are common enough here that our technicians have a working map of their quirks before they ring your bell.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Irving Homes
- Leaking attic ductwork in post-war homes. Original 1950s-70s ducting in 75060 and 75061 leaks into an attic that can hit 140°F in summer and stays hostile year-round, which starves the furnace of return air and drives static pressure high. The furnace gets blamed; the ducts are usually the culprit.
- Cracked heat exchangers in tight closets. Aging single-stage furnaces crammed into undersized closets with little clearance are prone to heat exchanger cracks and igniter failures. Both need a combustion test to confirm, not a guess.
- Short-cycling in single-zone slab ranches. One thermostat trying to serve an unbalanced floor plan reads the wrong room and cycles the furnace on and off. It’s a layout problem as much as an equipment one.
- Panel capacity that won’t take a modern controls package. Older Irving panels often lack the breaker capacity or dedicated circuit a new furnace or heat pump controls package needs, which surfaces the moment a replacement is on the table.
Pricing for Furnace Repair in Irving, TX
Typical furnace repair in Irving runs $150-$700 depending on what fails and how deep the repair goes. A failing igniter sits at the low end; a blower motor or heat exchanger issue runs higher. Heat pump repair is typically $150-$650, and a tune-up is $80-$200. Those are estimated ranges, and the written estimate sets the final price. What moves the number: parts, labor, and whether the return-air path has to be corrected to make the repair hold. The estimate is free, and we’ll walk you through what the diagnostic found before any work starts.
| Service | Typical Estimated Range |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Maintenance / Tune-Up | $80-$200 |
| Heat Pump Repair | $150-$650 |
We Also Serve Cities Near Irving
We work across Irving and the surrounding cities, so a call from Carrollton, Dallas, Grand Prairie, or Lewisville reaches the same team. If you’re just outside Irving and not sure whether you’re in our area, call and ask. The answer comes fast.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Irving
Look at both, and let the static pressure reading decide. In 75060 and 75061, a furnace problem is often really a duct-and-panel problem: original ducting and single-zone layouts mean a properly sized replacement can’t just slide into the old return path without a load calculation and panel check first. A like-for-like swap usually disappoints in these homes because it ignores the return-air restriction. Call (866) 942-9965 for a free estimate – we’ll tell you which fix actually holds.
Because one thermostat can’t read an unbalanced floor plan accurately. In an older Irving ranch, a furnace that short-cycles is frequently traced to a failing hot-surface igniter or a cracked heat exchanger inside a 20-plus-year-old cabinet, while a static pressure reading reveals original attic ducting leaking into a superheated attic. The usual play is to confirm the heat exchanger with a combustion test, replace the failing part, and correct the return-air restriction before recommending any equipment swap. Call (866) 942-9965 for an exact quote – estimates are free.
We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – nine of the industry’s leading brands. That breadth matters in Irving’s mixed housing stock, where premium single-stage furnaces sit in older homes and value-tier equipment fills the rental market. Our technicians are trained on all nine, so your cabinet isn’t a first-time puzzle. Call (866) 942-9965 to book.
Sometimes, and it’s worth checking before you commit to equipment. Older Irving panels often lack the breaker capacity or dedicated circuit a modern furnace or heat pump controls package needs. If the panel can’t carry it, that has to be solved before the install, not after. Call (866) 942-9965 for a free estimate – we’ll flag it up front.
Completely different diagnosis. A gas furnace makes heat at the burner; a heat pump moves heat and relies on refrigerant charge, a reversing valve, and a defrost cycle that has to terminate correctly in a freeze. North Texas winters are mild most years and brutal occasionally, so a heat pump gets tested both ways. Typical heat pump repair in Irving runs $150-$650. Call (866) 942-9965 for an exact quote – estimates are free.
Call (866) 942-9965 for furnace repair in Irving. We answer 24/7, fast dispatch runs 7am-7pm from Sunday through Friday, and the estimate is free.
Written by the team at Stallion AC Repair.