Furnace Repair in Dallas, TX | Stallion AC Repair

Furnace Repair in Dallas - Same-Day Repair, Priced Before We Start

Same-day diagnosis with the repair price given before any work starts, and an honest repair-versus-replace answer when the system is near the end of its life.

We answer 24/7

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate
Questions about your HVAC?Free estimate, price agreed before work starts
Call (866) 942-9965

Fast, Reliable Furnace Repair Across Dallas

When your heat quits in the middle of a Dallas cold snap, you want a straight answer and a working furnace, not a sales pitch. We work on gas furnaces and heat pumps across Dallas, from the older pier-and-beam homes near Deep Ellum to the postwar brick houses of East Dallas. Dallas winters are short but they hit hard, and a furnace that limped through last season usually picks the coldest week to fail. Our technicians have up to 12 years of experience and know the brands inside these homes before they arrive.

Call (866) 942-9965

Call (866) 942-9965. We answer 24/7, and we run fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.

Why Dallas Homeowners Call Stallion AC Repair for Furnace Repair

Dallas HVAC work is its own animal. This city swings from 100°F-plus summers to genuine freezes, and a furnace here has to do its job while the same house is built for peak cooling load. That mismatch is where a lot of our calls come from, and it’s why we ask about the whole system, not just the broken part.

We handle both heating and cooling, so you’re not juggling one contractor for the furnace and another for the AC. When the honest answer is “replace it” or “this older system needs rightsizing before another repair makes sense,” we say so plainly. When it’s a capacitor or a blower motor, we tell you that too. Repair-or-replace advice shouldn’t depend on which option pays better.

Our technicians are trained across nine leading brands, so the diagnosis starts with knowledge of your specific equipment rather than guesswork. That shortens calls and it keeps you from paying for trial and error. Whether you’re near Uptown or out toward the core, we serve Dallas and the surrounding neighborhoods, and we book work around the same weather the whole city is dealing with.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Heat Pump Repair in Dallas

Heat Pump Repair in Dallas often comes down to the extremes: a system sized for brutal summer heat that gets asked to produce warmth during a hard freeze. Heat pumps here run year-round, so by the time winter arrives the reversing valve, defrost controls, and refrigerant charge have already been through a full cooling season. When a Dallas homeowner calls, it’s usually because the unit is blowing cold in heat mode, icing over, or tripping the breaker after a storm. Typical heat pump repair runs $150 – $700, and the written estimate sets the final price.

Reversing Valve and Defrost Troubles

A heat pump stuck in cooling mode or icing up in cold weather usually points to the reversing valve or a defrost control that’s failed. These are diagnosis-first jobs. A technician tests the valve and the board before quoting a repair, because replacing the wrong part wastes your money.

Storm and Surge Checks

Spring thunderstorms and grid switching knock out control boards and capacitors on outdoor units. After a surge, the system may run but cycle wrong, or not start at all. Testing the board and capacitor before restarting anything prevents a small fix from becoming a compressor replacement.

Heating Repair in Dallas

Heating Repair in Dallas spikes after the kind of hard freeze that burst pipes and killed condensate lines across East Dallas and Deep Ellum in 2021. Many of those same older homes now need freeze-protection upgrades alongside the repair itself, a pattern you rarely see in newer suburban housing. When a furnace won’t light, short-cycles, or trips the breaker, we trace it from the ignitor and gas valve through the blower and heat exchanger. Typical heating repair runs $150 – $700, with the written estimate setting the final cost.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 942-9965

Freeze-Protection Upgrades

After a deep freeze, the repair is only half the job. Older homes on pier-and-beam foundations around the core often need condensate lines rerouted or insulated and freeze protection added so the next hard freeze doesn’t repeat the damage. We tie that work into the heating call so it gets done in one visit.

Ignitor, Gas Valve, and Blower Motor

Most no-heat calls land on an ignitor, a gas valve, or a blower motor that’s been cooked by years of extreme attic heat. Gas-related work on these parts needs a trained technician. We test and replace rather than talk you through it, because a gas valve isn’t a homeowner repair.

Trusted Brands We Service in Dallas

We work on Goodman, Rheem, York, and Daikin equipment, plus Carrier, Trane, Lennox, Bryant, and American Standard. That covers the value-tier furnaces common in Dallas’s older homes and the premium systems going into newer builds. We don’t claim to keep parts in stock, so what we offer is straightforward: a technician who knows the brand, an accurate diagnosis, and a fast turnaround on getting you heat. If a part needs ordering, we tell you the timeline up front instead of leaving you guessing through a cold night.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your HVAC?Free estimate, price agreed before work starts
Call (866) 942-9965

Common Furnace Repair Problems We See in Dallas Homes

  • Flooded condenser coil after heavy rain or ice melt. In the older inner-ring neighborhoods, a submerged outdoor unit is common after a storm. Flipping the breaker on a wet condenser can short the compressor, so it has to be dried and tested first.
  • Power-surge damage to control boards and capacitors. Dallas’s spring thunderstorm season and grid switching take out boards and capacitors across the city. These show up as a system that won’t start or cycles erratically.
  • Weak capacitors and seized blower motors. In pier-and-beam homes, attic heat is extreme and it accelerates wear on capacitors and blower motors. It’s often the first thing to fail in a system pushed past its design limits.
  • Undersized systems and restricted airflow. Many older homes still have original galvanized ductwork and undersized returns hiding in crawlspaces. When airflow is restricted, a simple repair can turn into a duct redesign.

Pricing for Furnace Repair in Dallas, TX

A typical furnace repair in Dallas runs $150 – $700. That range covers the common failures: ignitors, capacitors, blower motors, gas valves, and heat exchanger work. What pushes a job toward the top of the range is anything that turns into more than a part swap, like a blower motor on a system that’s been overheating for years, or duct restriction that has to be corrected for the furnace to run right. After a freeze or a flood, add the drying and testing time that has to happen before anything gets restarted.

Service Typical Estimated Range
Furnace Repair $150 – $700
Heat Pump Repair $150 – $700
Heating Repair $150 – $700

The written estimate sets the final price. Estimates are free. Call (866) 942-9965 and we’ll get a technician out to look.

We Also Serve Cities Near Dallas

If you’re just outside the city, our furnace repair team covers the surrounding area too. We also take calls in Mesquite, Irving, Garland, and Richardson. Same straight talk, same upfront estimate, same free consultation before any work starts. If you’re in one of those cities and your furnace is failing, call and we’ll tell you what we can do and when.

Serving Dallas, TX – Our Local Coverage Area

We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Furnace Repair in Dallas

Why Dallas Chooses Stallion AC Repair

We set the standard for furnace repair in Dallas.

30-60 Min Response

Fast dispatch across Dallas, 7am-7pm. Same-day service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Dallas

Getting your furnace repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your furnace repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Dallas - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local furnace repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Dallas Customers Say

Trusted by homeowners across Dallas and surrounding areas.

★★★★★

"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."

Robert Ziegler
★★★★★

"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."

Daniela Reyes
★★★★★

"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."

Veronica Delgado

Ready for Furnace Repair in Dallas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Dallas.

(866) 942-9965

Request a Free Estimate in Dallas

Tell us about your furnace repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7