AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Irving
Replacing an air conditioner in Irving isn’t the same job it is in a newer suburb, and we plan every installation here with that in mind. Plenty of homes in this city were built before the first energy code touched a duct, and a system swap that ignores that history is a swap you’ll pay for twice. We know Irving street by street, from the older blocks near the airport to the newer towers over in Las Colinas, and we bring a load calculation and a duct check before anyone talks about tonnage. Call (866) 942-9965 and we’ll get your installation scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Irving Homeowners Call Stallion AC Repair for AC Installation
We’ve built a strong local reputation in Irving by giving straight answers on repair versus replace instead of pushing whichever system has the higher ticket. When a 1970s split system finally quits, the honest question is whether the ducts and the panel can support a modern unit, and we’ve earned repeat trust here by answering that question truthfully before quoting anything. Our technicians have up to 12 years of experience, and they’ve worked across nine leading HVAC brands, so they recognize your existing equipment and its quirks before the first visit.
Irving is where the two sides of the metro meet. Rooftop package units on commercial builds and garden-style apartment complexes sit a few blocks from original single-family homes running ducts from a half-century ago, so we routinely read two very different service calls in the same week and the same neighborhood. Response times to Irving are quick because the whole corridor is familiar ground.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
HVAC Installation in Irving
HVAC Installation in Irving starts with measurement, not with a truckload of equipment. Before we set a new condenser, we run a room-by-room load calculation for the house, take static pressure readings on the existing air handler and ducts, and check the electrical panel for the capacity a modern system needs. In a slab-foundation home in 75061 still running its 1970s ductwork, this step is where the whole job gets decided. A typical HVAC installation in Irving runs $3,500 – $7,500, and the written estimate sets the final price.
Load Calculation First
North Texas summers push triple-digit heat for months, so an oversized unit is a real liability, not a safety margin. It short-cycles, pulls humidity poorly, and wears out faster. A proper load calculation matches the equipment to the house, the window orientation, and the insulation actually installed, not to whatever size the old unit happened to be.
Duct and Panel Checks
Original ducts in older Irving homes often leak a large share of their air straight into a 140°F attic, and a modern condenser pushing against that leak never reaches its rated efficiency. We test and seal or resize as needed. The panel check matters just as much: 1950s-70s homes regularly lack the service capacity a high-efficiency or heat pump system needs.
Heat Pump Installation in Irving
Heat Pump Installation in Irving means choosing one machine that has to carry both the cooling load and the occasional hard freeze. That’s a real design question here. North Texas heat is the year-round priority, but the February 2021 freeze showed what a cold snap does to heat pumps when exposed condensate lines and outdoor units aren’t protected. We size the system for summer demand and confirm it can hold heat through a cold event. Heat pump installation in Irving typically runs $3,500 – $7,500, with the written estimate setting the final price.
Sizing for Both Seasons
A heat pump is judged on its worst day, and in this climate the worst days come from opposite directions. We match capacity to the cooling load first, then confirm cold-weather performance and backup capability for the handful of deep freezes a decade brings.
Protecting the Outdoor Unit
Exposed condensate lines are a common winter failure point in Irving, and a freeze can leave a heat pump fighting ice instead of heating the house. Installation includes routing and protection so the system can ride out a hard cold snap without emergency calls.
Trusted Brands We Service in Irving
We’re trained on nine leading HVAC brands, including Carrier, Trane, Lennox, and Goodman, so we know your equipment before we arrive rather than learning it on your dime. That breadth matters in a city where one block holds premium carrier systems and the next holds value-tier Goodman units. We don’t stock parts on a truck or claim to, and that’s deliberate: what we bring is brand knowledge and fast turnaround, not a promise to have every component riding along. Whether you’re upgrading to a Trane or replacing an aging Goodman, we can recommend the right tier for your home and your budget instead of what’s easiest to sell. See our AC installation service for the full scope.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Irving Homes
- Like-for-like tonnage swaps that fail. A homeowner replaces a dead 3-ton unit with another 3-ton system and finds it short-cycles and never satisfies the thermostat. The cause is usually original ductwork leaking 30-40% of its air into a 140°F attic and a panel that can’t handle the new unit’s startup amps.
- Panels without the capacity for modern equipment. Many 1950s-70s slab homes lack the service capacity a heat pump or high-SEER2 system needs, which shows up as nuisance trips or a required panel upgrade before installation.
- Single-zone systems in unbalanced homes. Two-story and add-on floor plans run one zone through very different spaces, so a new unit runs constantly without ever fixing hot upstairs rooms.
- Aging attic air handlers in tight closets. Older Irving homes tuck the air handler into undersized closets where airflow was marginal when it was built and worse now, so the equipment change alone won’t restore comfort.
Pricing for AC Installation in Irving, TX
Pricing here is set per job by the written estimate, and every estimate is free. The ranges below are typical for Irving and reflect the real work an older home often needs before equipment goes in. A straight equipment change costs less than a job that also requires duct sealing, resizing, or a panel upgrade, and we tell you which you’re facing before you commit. Here’s how the numbers usually land.
| Service | Typical Estimated Range |
|---|---|
| AC Installation (standard split system) | $3,500 – $7,500 |
| Heat Pump Installation | $3,500 – $7,500 |
| AC Repair (pre-install diagnostic) | $150 – $650 |
| Tune-Up (post-install verification) | $80 – $200 |
What moves the number is the house, not the brand label. Duct sealing, a panel upgrade, or added returns push toward the upper end; a clean swap in a home whose ducts were already brought up to standard lands near the low end. Call (866) 942-9965 for a free estimate and a fixed price in writing.
We Also Serve Cities Near Irving
We work across the metro, so homeowners in Carrollton, Dallas, Grand Prairie, and Lewisville can reach us for the same installation service. We serve Irving and the surrounding communities, bringing the same load-calculation-first approach wherever we go. If you’re just outside the city line, call and we’ll confirm coverage.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Irving
Because a straight tonnage swap skips the two checks that decide performance: load calculation and static pressure. In 1950s-70s Irving homes, original ductwork often leaks 30-40% of its air into a 140°F attic, so a correctly sized new unit still short-cycles and never satisfies the thermostat. A qualified installation starts with a duct pressure test or static pressure reading, not a tonnage match. Call (866) 942-9965 for a free estimate.
Often, yes. Many 1950s-70s slab homes in Irving don’t have the service capacity a modern heat pump or high-SEER2 system needs, which shows up as nuisance breaker trips. We check the panel before setting the condenser so you know up front whether an upgrade is part of the job. Call (866) 942-9965 – estimates are free.
SEER2 is the updated efficiency rating used for new air conditioning equipment, and it matters here because North Texas runs a heavy cooling load for months. A higher-efficiency system can trim running costs, but only if the ducts can deliver the air it moves. Without sealed, correctly sized ducts, high-SEER2 equipment can’t reach its rating. Call (866) 942-9965 to talk through your options.
Triple-digit stretches make cooling the year-round priority, so sizing and duct integrity matter more than brand marketing. An oversized unit short-cycles, dehumidifies poorly, and wears faster in this climate. We size to the real load so the system can hold up season after season. Call (866) 942-9965 for a free estimate.
Yes, when it’s sized and installed for cold events. The February 2021 freeze strained heat pumps and froze exposed condensate lines, so proper installation includes protecting the outdoor unit and confirming cold-weather performance alongside the summer cooling load. Call (866) 942-9965 and we’ll walk through what your home needs.
Whether you’re in an older slab home near the airport or a newer place in Las Colinas, a good installation starts with reading the house before the equipment. Call (866) 942-9965 for a free estimate on AC installation in Irving. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Stallion AC Repair.