AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Richardson
If your system has finally quit and you’re weighing a full replacement, you’re in the right place. AC installation in Richardson typically runs $3,500 – $7,500 for a complete system, and the final number is set by a written estimate after we look at your home, your ductwork, and your existing equipment. Richardson is a replacement market, not a builder market. Most of the single-story ranch and brick tract homes here went up between the 1960s and 1980s during the telecom boom, which means nearly every install is a tear-out-and-match job, not a fresh build. Call (866) 942-9965 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Richardson Homeowners Call Stallion AC Repair for AC Installation
We work on the brands Richardson homeowners actually own: Lennox, Goodman, Rheem, York, and five others. Our technicians have up to 12 years of experience across those lines, so they know the equipment before they arrive rather than learning it on your time. That matters more in a mature city than anywhere else, because the system coming out of your attic is often three or four decades old and the paperwork is long gone.
Richardson sits on the heavy Blackland Prairie clay, and that clay moves with the seasons. A condenser pad that was level in 1995 may be tilted now. Attic duct runs that ran clean when they were installed often develop cracks as the slab shifts. When we quote a replacement, we look at those pieces too, because a new condenser bolted to a sinking pad and feeding cracked ducts will never deliver its rated capacity. We also cover heating under the same roof, so a furnace repair or replacement doesn’t send you hunting for a second contractor.
No job is a sales script for us. Repair or replace, we’ll give you a straight answer, and the recommendation follows your budget and your goals rather than whatever’s easiest to move.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Ductless Mini Split Installation in Richardson
Ductless mini split installation in Richardson solves a specific problem: the room that never gets cool, or the space that was never on the original duct system at all. In the older ranch homes here, additions, converted garages, and back bedrooms often sit at the far end of a trunk run that was sized for the 1970s house and nothing more. A mini split handles that zone directly, without tearing into walls or reworking the whole attic. Typical installed cost falls within our $3,500 – $7,500 range depending on how many zones and how much line set and electrical work the job needs, and the written estimate sets the final price.
When a Single Zone Makes Sense
A single-zone unit fits well when one room runs hot while the rest of the house holds temperature. It’s also the simplest answer for a sunroom or a converted garage where running new duct is impractical.
Multi-Zone Layouts for Larger Additions
Bigger additions and two-story homes near the Telecom Corridor often need two or three indoor heads on one outdoor unit. We size each zone on its own heat load rather than splitting one number across the house.
AC Replacement in Richardson
AC replacement in Richardson is almost always a pull-and-match job, and getting it right means starting from the house, not the old nameplate. Matching new tonnage to original ductwork that was never designed for modern static pressure is where most installs go wrong. A typical replacement here runs $3,500 – $7,500, and the written estimate sets the final price. On a typical job, a homeowner with a 1970s ranch calls after the original condenser quits. The installer finds more than a dead compressor: a pad sunk into the clay, a cracked attic trunk run, and an air handler sized for a house that has since added square footage. A qualified pro starts with a room-by-room load calculation, checks duct static pressure before committing to SEER2 tonnage, and often replaces or re-seals attic ductwork and resets the pad so the new coils actually deliver rated capacity.
Load Calculation First
Copying tonnage from a 1970s plate into a house with added rooms is how systems end up short-cycling and never holding setpoint during 100°F+ stretches. We size to the house as it stands today.
Ductwork and Pad Corrections
Clay-soil movement is part of the job here. Cracked attic runs and a tilted condenser pad can read as a bad refrigerant charge when the real fault is ductwork and a misaligned unit.
Trusted Brands We Service in Richardson
We’re trained across nine major HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That spread covers both premium lines (Carrier, Trane, Lennox) and value-tier options (Goodman), so we can recommend the right system for your home rather than just what’s available. We don’t stock parts locally; we quote and order what the job calls for, which keeps the recommendation honest. If your existing equipment is a York or Rheem unit, we already know its service history patterns and what typically fails. Fast turnaround on quotes and install dates, and one contractor for your furnace, your AC, and everything in between. The Stallion name is about work that holds season after season, not just passing a next-day callback.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Richardson Homes
- Replacement without a load calculation. New tonnage gets copied from a 1970s nameplate into a house with added rooms and original undersized attic ductwork. The system short-cycles and never holds setpoint during a 100°F+ stretch.
- Clay-soil slab movement. Blackland Prairie clay shifts seasonally, cracking attic duct runs and tilting the condenser pad. A fresh install then reads a bad refrigerant charge and high static pressure when the real fault is leaking ductwork and a misaligned unit.
- Heat pump and propane changeouts sized for cooling only. Rural-edge properties with no gas main often get a heat pump matched to summer load alone. It struggles in shoulder seasons and freeze events like the 2021 Uri cold snap because capacity was never matched to an exposed building envelope.
- Original attic air handlers in brutal summer heat. Many 1960s – 1980s homes still run undersized attic equipment and original ducts. Attic installs here are tough work, and the equipment has to be selected for the attic it lives in, not a showroom.
Pricing for AC Installation in Richardson, TX
Typical estimated ranges for Richardson are below. These are ranges, not quotes; the written estimate after we see your home sets the final price, and estimates are free.
| Service | Typical Estimated Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
What moves you within that range: system size, whether the attic ducts and condenser pad need correction, whether you go premium or value-tier, and how much line set and electrical work the job needs. A straight swap in a well-kept home sits near the low end. A full changeout with duct re-sealing and pad reset in one of the older subdivisions near 75082 pushes toward the high end. Call (866) 942-9965 and we’ll come out, measure, and put it in writing.
We Also Serve Cities Near Richardson
Richardson sits close to a lot of the metro, and we serve the surrounding cities too: Garland, Carrollton, Dallas, Mesquite. If you’re just outside the Richardson line, nothing changes about how we quote or how we work. Same written estimates, same brand knowledge, same straight answers. Call (866) 942-9965 and we’ll schedule a visit.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Richardson
Yes, and skipping it is the most common installation mistake we see in Richardson. A room-by-room load calculation sizes the new system to your house as it stands today, not the nameplate from 1975. Call (866) 942-9965 for a free estimate.
It depends on your envelope and how exposed the property is, and the honest answer usually comes down to sizing. A heat pump sized for cooling only often struggles in shoulder seasons and freeze events, so we match capacity to the building, not just the summer load. Call (866) 942-9965 and we’ll walk it through.
Yes. Blackland Prairie clay moves seasonally, and a tilted pad is part of a proper replacement in Richardson rather than an afterthought. We reset the pad as part of the job so the new unit sits level and drains right. Call (866) 942-9965 for a free estimate.
SEER2 changes how equipment is rated and how it interacts with your ductwork, and that second part matters most here. New tonnage matched to original, undersized attic ducts can read high static pressure and never hit rated efficiency. We check duct static pressure before committing. Call (866) 942-9965 for a free estimate.
Yes, and it’s often the cleanest answer for an outbuilding where running new duct isn’t practical. Outbuilding and workshop conditioning is one of the reasons a ductless system makes sense on rural-edge properties around Richardson. Call (866) 942-9965 and we’ll size it for the space.
Written by the team at Stallion AC Repair.