Lennox HVAC Service in Grand Prairie, TX

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate
Questions about your HVAC?Free estimate, price agreed before work starts
Call (866) 942-9965

Why Grand Prairie Homeowners Choose Lennox HVAC

We provide independent Lennox HVAC service in Grand Prairie: AC repair, furnace repair, and full system installation for the equipment already in your home or the replacement you’re weighing. What makes our Lennox work different is that we diagnose by series and symptom, not by sales script. We’re independent, not authorized by Lennox, and we work on Lennox alongside eight other leading brands, so the recommendation you get is about your equipment and your budget, not about what we’d rather sell.

Call (866) 942-9965

Grand Prairie sits in the hail-prone stretch of the DFW Metroplex and spreads across Dallas, Tarrant, and Ellis counties, which means a replacement on one side of town can walk through a different municipal permitting path than the same job a few miles away. Add summers that push design temperatures near 100°F and a cooling season that runs far longer than the heating season, and Lennox systems here earn their keep. Our technicians have up to 12 years of experience. Call (866) 942-9965. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Trust Stallion AC Repair for Your Lennox HVAC?

Lennox builds equipment across a real spread of tiers, from builder-grade Merit Series units to the modulating Signature Collection furnaces, and each tier fails in its own way. Our technicians know that spread before they arrive, so the first visit is spent confirming a diagnosis rather than learning the system.

We use quality parts that fit Lennox equipment. For critical components like control boards, inducer assemblies, and coils, we source OEM Lennox parts; for other pieces we use quality aftermarket equivalents when they meet spec and shorten your downtime. That combination keeps the repair correct without stretching it into a week of waiting.

Warranty-safe practice matters too. We match parts to your equipment’s specifications, keep the repair documented, and avoid the shortcuts that give a manufacturer a reason to deny a claim later. If your Lennox system is still under a parts warranty, tell us when you call so we can factor that into the repair plan. One contractor handles your cooling and your heating, which means no juggling a separate company when the season turns.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Common Lennox HVAC Problems We Fix in Grand Prairie

These are the failure patterns we see most on Lennox equipment in North Texas. They’re specific to how these systems are built and how hard they run here.

  • Failed draft inducer motors and pressure switch faults on Elite and Signature furnaces. After a few heating seasons, the inducer motor starts drawing higher amps and the pressure switch circuit stops proving draft. The board locks out and the furnace goes quiet. It’s one of the most common Lennox furnace calls we run, and it’s usually the motor or a blocked condensate trap rather than the board itself.
  • Leaking evaporator coils on older Merit and Elite air handlers. A slow coil leak drops refrigerant charge, the suction line ices up, and cooling fades. Grand Prairie’s long cooling season means the coil cycles more hours per year than in cooler markets, which accelerates the wear. A leak search confirms it before anyone recommends a coil or a recharge.
  • Control board and ignitor failures on 80% AFUE furnaces. Voltage spikes and moisture intrusion are the usual culprits. An ignitor that glows but never lights, or a board that resets on its own, points here.
  • Cracked heat exchangers in aging G-series and early Merit furnaces. This is a safety concern, not a comfort one. A cracked exchanger can let combustion gases into the supply air, so it gets inspected carefully and the repair-or-replace conversation gets honest.
  • Stressed condensate drains and line sets from foundation movement. West of the escarpment near Joe Pool Lake, the soil shifts between sandy terrain and shrink-swell Blackland Prairie, and that seasonal heave pulls on condensate lines and refrigerant runs. Contractors working from Dallas proper don’t run into this pattern the way we do.
Want to talk it through?Free estimate, price agreed before work starts
Call (866) 942-9965

Lennox Parts & Our Repair-vs-Replace Approach

A Lennox Elite or Signature furnace often starts short-cycling or locking out after several heating seasons, with a pressure-switch or inducer fault code on the board. The usual cause is a failing draft inducer motor or a blocked condensate trap. A qualified local pro tests the pressure switch circuit, clears the condensate line, and replaces the inducer if the motor is drawing high amps. On the cooling side, a Merit or Elite air conditioner with a frozen suction line usually points to a leaking evaporator coil, which gets confirmed with a leak search before recommending coil replacement or recharge.

For Lennox systems past 12 to 15 years with a failed compressor or heat exchanger, we put a replacement comparison next to the repair number rather than pushing a repair that won’t hold. Repair or replace? We’ll give you a straight answer, and the written estimate sets the final price. Call (866) 942-9965 for a free estimate.

Our Lennox Service Process – Step by Step

  1. 1
    Diagnosis. We pull the fault codes, then test the actual circuit behind them. A pressure switch error on a Lennox furnace gets tested at the switch, the tubing, and the inducer, because the code names a symptom, not a part.
  2. 2
    Repair or install. For repairs, we match the part to your series and confirm fit before installation. For installation, we size the equipment to your home rather than to what’s convenient, and we set the install date in writing.
  3. 3
    Test. We run the system through a full cycle: temperature rise on the furnace, static pressure and charge on the AC, and a check that condensate drains freely. That last step matters more here than in most markets given the soil movement near Joe Pool Lake.
  4. 4
    Warranty and documentation. You get a record of what was replaced and why, which is what a manufacturer wants to see if a parts claim comes up later.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Need a price for your HVAC?Free estimate, price agreed before work starts
Call (866) 942-9965

Lennox Products We Service & Install in Grand Prairie

We repair, service, and install the Lennox equipment common in North Texas homes. That covers Merit Series air conditioners and furnaces, Elite Series air conditioners and furnaces, Signature Series air conditioners and heat pumps, and the Dave Lennox Signature Collection modulating furnaces. On the repair side, that means AC repair, furnace repair, and heat exchanger work; on the install side, we replace aging equipment with the tier that fits your budget and your goals, whether that’s a value-tier unit or a premium system.

We don’t claim to stock Lennox parts or to be a Lennox dealer. We’re an independent service provider, and we work on your equipment the way the equipment calls for.

We Also Service These Brands

We work on Lennox and eight other leading HVAC brands, including Carrier and Trane. That breadth matters if you own more than one system, if you’re comparing replacement options across brands, or if you inherited equipment you didn’t choose. It also means our advice isn’t tied to a single manufacturer’s product line. You get an honest read on what you have and what it needs.

FAQs – Lennox HVAC Service in Grand Prairie

Service Typical Estimated Range
AC Repair $150 – $650
Furnace Repair $150 – $700
AC Installation $3500 – $7500
Tune-Up $80 – $200

Call (866) 942-9965 for an exact quote. Estimates are free.

Book Your Lennox Service in Grand Prairie, TX

One contractor for your Lennox furnace, your Lennox AC, and everything in between. We work on Lennox and eight other leading brands, so a replacement decision is based on your budget and goals, not what’s convenient to sell. Call (866) 942-9965 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm.

Written by the team at Stallion AC Repair.

Need HVAC help nationwide? Licensed & insured · 1-hour response · free estimates
Call (866) 942-9965
Local Service Coverage

Request a Free Estimate in Grand Prairie

Tell us what you need - Stallion AC Repair responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7