AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Grand Prairie?
Furnace replacement in Grand Prairie typically runs $3,200 to $7,800 for a standard residential gas furnace, with most homeowners landing in the $4,000 to $5,800 range after equipment and installation labor are combined. A straightforward like-for-like swap on an existing 80% system sits near the low end, while a high-efficiency condensing furnace with new venting and a larger capacity pushes toward the top. The written estimate always sets the final price, and the estimate itself is free.
Because furnace replacement is a whole-system change rather than a part swap, the number moves more than it does for a simple repair. Our Grand Prairie page covers the city-level picture, and this guide breaks the cost down line by line so you can see where the money actually goes. Call (866) 942-9965 when you want a firm number for your house. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical furnace replacement in Grand Prairie: $3,200 – $7,800, most jobs $4,000 – $5,800.
- The furnace itself is usually 55 – 70% of the total; labor, venting, and electrical work make up the rest.
- Switching from an 80% to a 90%+ condensing furnace adds venting and condensate work, which is where the price climbs.
- Our technicians have up to 12 years of experience and are trained on nine major brands, so your equipment isn’t a mystery.
- Estimate next to a repair quote before you decide. A cracked heat exchanger or a system past the point of economical repair rarely deserves another repair bill.
Furnace Replacement Cost Breakdown (2026)
These are typical estimated ranges for the Grand Prairie market in 2026. Every house is different, and the written estimate after an in-person look sets the final price.
| Line Item | Typical Estimated Range |
|---|---|
| Furnace equipment (80% single-stage, standard size) | $1,600 – $3,200 |
| Furnace equipment (90%+ condensing, high-efficiency) | $2,600 – $4,800 |
| Removal and disposal of old furnace | $150 – $350 |
| Installation labor (remove, set, connect, test) | $700 – $1,400 |
| New venting or flue work (condensing conversions) | $300 – $900 |
| Electrical work (new circuit, disconnect, or breaker) | $200 – $650 |
| Condensate drainage (high-efficiency furnace) | $100 – $300 |
| Gas line modifications | $150 – $500 |
| Duct transitions and plenum adjustments | $200 – $700 |
| Full replacement, typical total | $3,200 – $7,800 |
The equipment line is the biggest lever, and it splits cleanly into two tiers. Premium brands like Carrier, Trane, and Lennox sit at the top of the equipment range; a Goodman or other value-tier furnace can land several hundred dollars lower for comparable capacity. We work with all of them, which means the recommendation follows your budget and your goals rather than whatever happens to be easiest to sell.
Venting is the second lever most homeowners don’t see coming. An 80% furnace usually vents into an existing flue, so swapping one 80% unit for another keeps that cost near zero. Moving to a 90%+ condensing furnace changes the venting and adds condensate drainage, so the vent and drain lines in the table apply. That upgrade pays off over time in gas use, but it does add up-front cost.
Labor scales with access. A furnace in a closet off a hallway is a quick job. A unit crammed into a tight attic platform or behind a wall that has to be opened is a slower one, and the labor line reflects that. We’d rather see the space before quoting than surprise you later.
What Affects Furnace Replacement Pricing in Grand Prairie
Grand Prairie sits in a mild-winter band of North Texas, which shapes furnace pricing here in a few specific ways. Heating runs fewer hours per year than in colder markets, so homes tend to hold onto older equipment longer and the replacement is often triggered by failure rather than age. The rush that hits cold-climate cities in October doesn’t happen the same way, but the first hard cold snap still sends a wave of calls.
House and equipment factors
- Furnace capacity (BTU size). A larger home needs a bigger furnace, and the equipment and duct work both scale up. A 60,000 BTU unit for a modest house costs less than a 100,000 BTU unit for a large one, and the gas line and plenum work grow with it.
- Efficiency tier. An 80% furnace and a 90%+ condensing furnace are close in price at the low end, but the venting and condensate work on the condensing unit adds real cost. In a mild climate, the gas savings on a high-efficiency unit take longer to recover, so the right answer depends on how long you plan to stay.
- Brand and tier. Premium equipment costs more up front. We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so we can put a value-tier Goodman next to a premium Carrier and let you weigh the difference.
- Location of the existing furnace. Attic, closet, and crawlspace installs each carry their own labor. A furnace tucked into a tight attic platform with limited clearance takes more time than a closet unit at floor level.
- Duct and plenum condition. If the existing ducts and transitions don’t match the new unit’s dimensions, they get modified. Old flex duct that’s sagging or disconnected at the plenum adds to the job.
- Electrical and gas readiness. A modern furnace may need a dedicated circuit or a different disconnect than the old one had. If the gas line is undersized for the new capacity, it gets upsized.
Local factors specific to Grand Prairie
The housing stock here spans decades, from older single-story neighborhoods to newer construction on the edges of the city. Older homes often have furnaces in closets or on platforms that were sized for equipment built to different dimensions, so the new unit needs a transition. Newer homes usually have a straighter swap. The difference shows up in the labor line, not the equipment line.
Attic installations are common in this part of Texas, and an attic furnace in July is a different job than a closet furnace in January. The heat in an unconditioned attic affects how long the installation takes and how carefully the technician has to work. We plan for it rather than rush through it.
Because winters here are short and mild, many homeowners weigh a furnace replacement against the cost of one more repair. A heat exchanger crack is the usual tipping point. That’s a safety issue, not a maintenance inconvenience, and it’s the one case where we’ll tell you to stop repairing. Any furnace with a cracked heat exchanger or a compromised flue should be taken out of service, and we’d rather you hear that straight than pay for a repair that only delays the inevitable.
How to Save on Furnace Replacement
There’s no magic discount, but there are real ways to keep the number down.
- Get a written estimate before you commit. A free estimate gives you a firm number instead of a range, and it lets you compare line by line. Call (866) 942-9965 and we’ll set one up.
- Decide on efficiency honestly. In a mild-winter market, an 80% furnace is often the better value if you’re not planning to stay in the house for a decade or more. A high-efficiency condensing unit is worth the extra when you plan to stay and want lower gas bills.
- Consider a value-tier brand if the budget is tight. Goodman and similar value-tier equipment deliver solid performance at a lower equipment cost. We’ll put the numbers side by side.
- Replace before the failure. A furnace that fails on the coldest night of the year leaves you scheduling around an emergency. Planning the replacement on your own timeline usually means a simpler job and a cleaner quote.
- Ask what the estimate includes. Removal, disposal, venting, electrical, and a startup test should all be in the written estimate. A quote that leaves out disposal or electrical work isn’t a lower price, it’s an incomplete one.
- Bundle the heating and cooling decision. If your AC is also near end of life, replacing both at once can be more efficient than two separate jobs. We handle AC installation alongside furnace work under one roof.
One more thing worth saying: don’t let a repair quote pull you into replacing a furnace that has years left. A furnace repair in the $150 – $700 range on a unit that’s still sound is the right call. We’ll tell you when it is and when it isn’t. That’s the whole point of a repair-or-replace assessment done by a technician who knows the brand.
FAQs – Furnace Replacement Cost
How much does furnace replacement cost in Grand Prairie?
$3,200 to $7,800 is the typical range, with most jobs landing between $4,000 and $5,800. The written estimate sets the final price after we see your existing furnace, venting, and electrical setup. Call (866) 942-9965 for a free estimate.
Is it cheaper to repair or replace my furnace?
A repair in the $150 – $700 range is usually the better call if the furnace is otherwise sound. Replacement wins when the heat exchanger is cracked, the unit is failing repeatedly, or the repair bill approaches a meaningful share of a new system. We’ll give you a straight answer either way, with the numbers in front of you.
How much does a high-efficiency furnace cost compared to a standard one?
A 90%+ condensing furnace typically adds $600 to $1,900 over an 80% unit once venting and condensate work are included. The equipment itself is higher, and the vent and drain lines are extra. Whether it pays back depends on how long you stay and how much gas you use. Call (866) 942-9965 and we’ll run the comparison for your house.
Can you install a furnace the same day I call?
Sometimes. Same-day installation depends on the equipment being on hand and the scope of the job; a straight like-for-like swap is more likely to fit into one visit than a conversion with new venting. Call (866) 942-9965. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What brands do you install and service?
We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That’s nine major brands, which means we can put a premium Carrier next to a value-tier Goodman in the same conversation. Our technicians have up to 12 years of experience and are trained on each of them.
Does furnace replacement cost more in an emergency?
No. The price is set per job by the written estimate, and it doesn’t change based on the time you call. Call (866) 942-9965. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Repair or Replace? Get a Number in Grand Prairie
A furnace replacement is a real expense, and you deserve a real number before you decide. Call (866) 942-9965 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, and we’ll give you a straight repair-or-replace answer with the ranges in front of you. One contractor for your furnace, your AC, and everything in between. See how we handle the full picture on Stallion AC Repair before you call.
Pricing reflects the Grand Prairie market as of 2026. Stallion AC Repair offers free estimates – call (866) 942-9965.
Written by the team at Stallion AC Repair.
What Our Customers Say
"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."
- Robert Ziegler"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."
- Daniela Reyes"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."
- Veronica Delgado