AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateHVAC Company in Richardson, TX
Furnace replacement is the work Richardson homeowners call us about more than anything else, and the reason is in the housing. Most of this city was built between the 1960s and the 1980s during the telecom boom, so the furnace in your attic or closet is likely original or one replacement deep, and the ductwork around it has been through decades of North Texas summers and hard winter freezes. Richardson’s long 100°F stretches and the occasional freeze like 2021’s Uri event push that aging equipment to the edge. We’re Stallion AC Repair, and we work on Lennox, Goodman, Rheem and other leading brands. Call (866) 942-9965 for a free estimate.
Why Richardson Homes Are Different
Richardson sits on the heavy black clay of the Texas Blackland Prairie, and that soil does more to HVAC equipment here than most homeowners realize. The clay swells when it’s wet and shrinks hard when it dries, so slab foundations move seasonally. When a slab shifts, the condenser pad outside shifts with it, refrigerant lines get stressed at the wall penetration, and attic duct runs crack at the joints. A call that sounds like a failing compressor can turn out to be leaking ductwork or a misaligned outdoor unit, and we check for that before we quote anything.
The housing stock shapes the rest. Single-story ranch and brick tract homes dominate the established subdivisions, with some 1970s and 1980s two-story and condo clusters nearer the Telecom Corridor. Many still carry undersized, aging attic air handlers and original duct systems. Attic work in a Richardson August is genuinely brutal, and we plan around it rather than rushing a connection that will fail by the next summer. If your home sits in a subdivision with an HOA, check its rules on outdoor equipment placement and screening before an install date is set; some associations have opinions about what’s visible from the street.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Our Main Richardson Services
Two jobs come up again and again across Richardson, and both are ones we handle directly rather than passing to another contractor.
AC Installation in Richardson
Richardson’s older homes often need more than a like-for-like swap. The original equipment was sized for a house with different windows, different insulation and a duct system that has since lost its seal, so a straight replacement of the same tonnage can leave you short on cooling in a 100°F August. We look at the duct runs, the return path and how the house actually behaves before recommending equipment, and we work across both premium lines like Lennox and value-tier options like Goodman so the recommendation follows your budget instead of what’s easiest to sell. Learn how we handle AC Installation in Richardson.

Furnace Repair in Richardson
Furnace trouble in Richardson rarely announces itself at a convenient time. It shows up on the first hard freeze after a mild fall, when a system that sat idle since March won’t light. On the older ranch homes here, the common culprits are a failed igniter, a dirty flame sensor, a pressure switch that’s seen better days, or a flue that’s been compromised by attic heat. We diagnose the actual failure rather than selling a replacement on the first visit, and we tell you plainly when a repair is throwing money at a system that’s already past its life. See how we approach Furnace Repair in Richardson.

Furnace Replacement in Richardson
Furnace replacement in Richardson is mostly a story about time. The city’s core neighborhoods were built during the telecom boom, and a furnace installed when the house was new is now well past the range where a gas furnace is expected to last. Couple that with the freeze events North Texas has seen, and a system that survived the 1980s is running on borrowed time. We handle Furnace Replacement for homeowners who want a straight assessment and a written price, not a pressure sale.
Aging System Replacement
Signs you need it
You’ll know it’s time when the furnace is original to a 1960s or 1970s build, the repair bills are stacking up, or it fails to light reliably on the first cold snap after sitting idle all summer.
What it costs in Richardson
Replacement isn’t in our published repair ranges, so the number is set by the written estimate after we’ve sized the system to your home, though furnace repair in Richardson typically runs $150 – $700 as a reference point for smaller jobs.
How we do it
We assess the existing unit, the venting and the duct system, size the replacement to the house, then set a firm written price and a single install date with no surprises added on the day.
Freeze-Damage Replacement
Signs you need it
A furnace that took on water or a cracked heat exchanger after a hard freeze, a system that trips the breaker repeatedly, or visible corrosion on the burners all point to replacement rather than repair.
What it costs in Richardson
Like all replacement work this is priced per job by written estimate, and the smaller furnace repair range of $150 – $700 covers the diagnostic and minor fixes that sometimes reveal a unit is beyond saving.
How we do it
We inspect the heat exchanger and venting carefully for safety, confirm the ductwork is sound, and then replace the unit with equipment matched to your home and the brands you already trust.
What Furnace Replacement Costs in Richardson
Replacement is quoted per job, so the written estimate sets the final price. These ranges give you a realistic starting point for the smaller work that often comes first.
| Item | Typical range in Richardson |
|---|---|
| Furnace repair (diagnostic and minor fixes) | $150 – $700 |
| Furnace replacement assessment | Set by written estimate |
| Furnace replacement (sized to home) | Set by written estimate |
How long does furnace replacement take in Richardson?
A straightforward replacement is typically a single scheduled day once the equipment is in hand. We confirm the install date up front, and older homes with tight attic access or ductwork that needs attention may need a little more time.
Should I repair or replace my furnace in Richardson?
If the unit is original to a 1960s or 1970s home and has needed repeated repairs, replacement is usually the honest answer. We’ll tell you when a repair still makes sense. Call (866) 942-9965 for a free estimate.
Brands We Service in Richardson
We work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard equipment, and our technicians have up to 12 years of experience with them. We don’t claim to stock parts locally, so turnaround depends on the brand and the part. See our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for HVAC Company in Richardson, TX
These are typical estimated ranges for Richardson. The written estimate sets the final price.
| Service | Typical range in Richardson |
|---|---|
| AC repair | $150 – $650 |
| Furnace repair | $150 – $700 |
| AC installation | $3500 – $7500 |
| Tune-up | $80 – $200 |
In Richardson, price climbs with the age of the home and the condition of the duct system, since a cracked attic run or a shifted condenser pad adds work beyond the equipment itself. We give you an upfront price before any work begins.
Neighborhoods We Serve in Richardson
We take calls from all across Richardson, from the older ranch homes near the Telecom Corridor to the established subdivisions off Central Expressway. Because the city is compact, response is quick throughout, and where homes are built in the 1960s to 1980s, our technicians know the attic layouts and duct configurations that come with them.
- Heights Park
- Prairie Creek
- Canyon Creek
- Richardson Heights
- Lookout
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Richardson
Richardson sits at the edge of several communities we also serve. If you’re just outside the city line, we can help in Garland, TX, Carrollton, TX, Dallas, TX and Mesquite, TX. The same clay-soil conditions and 1960s to 1980s housing stock show up across these areas, so our approach carries over.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Richardson
Yes. Richardson is a compact city, so once you call we can usually get a technician out fast. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (866) 942-9965.
Most cities require a permit for furnace replacement, and Richardson is no exception in general terms, so ask the city’s building department before work begins. We can walk you through what the permit typically involves.
Call (866) 942-9965. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Estimates are free.
When your furnace is on its last legs after decades of Richardson summers and freezes, or you’re ready to move to a system built for the next 20 years, call (866) 942-9965. We answer 24/7, fast dispatch runs from 7am to 7pm Sunday through Friday, and estimates are free. We work on your brand, we give you a straight answer on repair versus replace, and we put the price in writing. Reach out to Stallion AC Repair for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local HVAC pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Richardson Customers Say
"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."
- Robert Ziegler"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."
- Daniela Reyes"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."
- Veronica Delgado