AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Dallas
Installing a new air conditioner in Dallas is rarely a simple equipment swap. Our technicians have up to 12 years of experience with the older housing stock that fills the neighborhoods close to downtown, and we know what a changeout actually involves in a pier-and-beam home or a dense-lot block where the condenser has to share a wall line with the neighbor. When your system is done, you call us once. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We serve homeowners across Dallas, from the inner-ring blocks out through the surrounding neighborhoods, and we size every system to the house in front of us rather than to a rule of thumb. For a free estimate on AC installation, call (866) 942-9965.
Why Dallas Homeowners Call Stallion AC Repair for AC Installation
People in Dallas call us because we work on the brands they already own or are shopping for, not a single manufacturer we’re locked into. We’re trained on Carrier, Trane, Lennox, Goodman, and five other leading brands, so when we walk up to a Trane condenser on a 1950s brick home or a Carrier in a newer build, we know the equipment and its history. That matters when you’re deciding whether to keep a system going or replace it, because the honest answer depends on the specific unit, not a generic sales script.
We give straight repair-or-replace advice. If the equipment has years left and the problem is a failed component, we say so. If the condenser is undersized for a house that now sees 100°F stretches and the ductwork is choking airflow, we explain that plainly too, and we price out both paths before you decide. The estimate is free, and the written estimate sets the final price on the work.
You’ll also have one contractor for the furnace and the AC. Dallas swings from 100°F-plus summer highs to hard freezes like February 2021, and juggling a separate contractor for each season gets old. We handle both under one roof.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Ductless Mini Split Installation in Dallas
Ductless Mini Split Installation in Dallas solves a real problem in the older homes near downtown, where there’s no attic run or crawlspace path wide enough for conventional ductwork. A mini split skips the ducts entirely: a slim wall-mounted head in each room, refrigerant lines routed through the wall or along an exterior chase, and a condenser outside. Installers mount the indoor heads where the airflow lands on the living space, run the line sets with proper slope and insulation, and charge the system to spec.
Homeowners choose a mini split when they’re adding cooling to a room that’s never had central air, converting a window-unit setup, or finishing a space where ducts can’t go. For rooms and additions, it’s often the cleaner answer than tearing into a 1920s wall cavity.
Where Mini Splits Fit Best
A single-zone mini split handles one room well, and multi-zone systems cool several spaces off one outdoor unit. In a small postwar brick home with a cramped closet air handler, a mini split can carry part of the load without a full duct rebuild.
Line Sets and Clearance
Getting the line set routing right matters. On a tight lot, the outdoor unit needs clearance for airflow and space from the property line so the compressor noise doesn’t carry into a neighbor’s window.
AC Replacement in Dallas
AC Replacement in Dallas is really a rightsizing job in much of the older housing stock. When a decades-old condenser finally quits, dropping in a new unit of the same nominal tonnage often makes things worse, because the original was undersized for hotter summers and the return duct can’t push the airflow a modern air handler needs. The replacement starts with a room-by-room load calculation, then a look at the crawlspace or closet return before anyone quotes tonnage.
That’s the part most people don’t expect. In the inner-ring neighborhoods, pier-and-beam crawlspaces hide original galvanized duct runs and undersized returns, so a straight changeout turns into a duct rebuild. We scope it honestly up front so the price you approve covers the work the house actually needs. Typical estimated AC installation in Dallas runs $3,500 to $7,500, with duct work figured separately when the job calls for it.
Sizing to the Load
Installing a bigger condenser on an undersized return just moves the failure. The system short-cycles, and the evaporator coil can freeze. We size to the calculated load, not the old nameplate.
Freeze Protection From the Start
After the 2021 freeze split condensate lines and drain traps across older Dallas homes, freeze protection became a standard part of the install conversation here. That means insulated and protected drain lines, proper trap depth, and routing that survives a hard freeze.
Trusted Brands We Service in Dallas
We’re trained on nine leading HVAC brands, and the ones Dallas homeowners ask about most are Carrier, Trane, Lennox, and Goodman. That range lets us recommend premium equipment when it earns its keep and value-tier equipment when a budget is tight, driven by your home and goals rather than what’s easiest to sell. We don’t claim to stock parts locally, but we do know your specific system before we arrive, which shortens turnaround on both new installs and repairs. Whether your house needs a Carrier, a Trane, or a Goodman, the recommendation follows the load calculation and your budget. One contractor for the whole lifecycle.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Dallas Homes
- Closet and crawlspace air handlers on original galvanized duct. These can’t move the rated airflow, so new equipment short-cycles and freezes the evaporator coil. The fix is rebuilding the return before the new system goes in, not after.
- Rooftop condensers rattling against neighboring walls. On dense-lot blocks, a rooftop condenser at 100°F-plus peak cooling can trigger noise complaints. A pad relocation or vibration isolation usually prevents it.
- Cracked condensate lines from hard freezes. Pier-and-beam crawlspaces without freeze protection let drain lines and traps split during a cold snap. A spring install can inherit a cracked line the old system was masking.
- Undersized systems in older inner-ring homes. Small postwar brick homes pushing aging equipment through today’s summers are running past design limits. A fresh load calculation tells you what the house actually needs now.
Pricing for AC Installation in Dallas, TX
Typical estimated AC installation in Dallas runs $3,500 to $7,500. That range covers the equipment and the labor for a standard changeout, and it moves within that band based on tonnage, efficiency tier, brand, and how much the duct and return work adds. A mini split or a duct rebuild sits outside that band and gets its own line on the estimate. For comparison, AC repair typically runs $150 to $650 and a tune-up $80 to $200, which is useful when you’re weighing a repair against a replacement.
The estimate is free, and the written estimate sets the final price. We walk the house, run the load calculation, and check the return before we quote, so the number you approve is the number for the job.
| Service | Typical Estimated Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| AC Repair | $150 – $650 |
| Tune-Up | $80 – $200 |
Call (866) 942-9965 for a free estimate.
We Also Serve Cities Near Dallas
If you’re just outside the city limits, we can help there too. We serve Mesquite, Irving, Garland, and Richardson along with Dallas itself, and the same sizing and duct work standards apply across the metro. The housing stock shifts as you move out from the core, but the principle doesn’t: measure the load, check the return, then quote the tonnage. Call for a free estimate wherever you are in the area.
Serving Dallas, TX – Our Local Coverage Area
We serve Dallas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Dallas
Because the original galvanized duct runs and undersized returns in those crawlspaces can’t carry the static pressure a modern air handler needs. A new condenser on the old return will short-cycle and freeze the coil, so the return gets rebuilt to make the new system perform. We scope that in the written estimate before work starts.
Yes, with the right siting. Moving the pad away from the property line and adding vibration isolation keeps compressor noise from carrying to a neighbor’s wall at peak cooling. We plan the placement as part of the install, not as a callback. Call (866) 942-9965 for an exact quote, and estimates are free.
SEER2 is the current efficiency rating that new equipment must meet, and it affects both the equipment you can buy and the price. Higher efficiency generally costs more up front. We’ll show you where the efficiency tiers land in the $3,500 to $7,500 range and let you weigh it against how hard your system runs through a Dallas summer.
Often, yes. A ductless mini split cools a room or an addition without tearing into a wall cavity for ducts, which suits the older inner-ring homes. It’s a practical route when a full central system would mean a duct rebuild the house can’t easily accommodate. Call for a free estimate on a mini split.
At minimum, insulated and protected condensate drain lines with proper trap depth, routed so they survive a hard freeze like February 2021. Pier-and-beam crawlspaces are where these lines split when unprotected. We treat freeze protection as a standard part of the install conversation in older Dallas homes, not an add-on.
Ready to move on a new system? Give us the house, the symptoms, and the budget, and we’ll tell you straight whether it’s a repair or a replacement. Then we’ll size it right and put it in. Call (866) 942-9965 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Stallion AC Repair.