AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateHVAC Company in Arlington, TX
Furnace replacement in Arlington is a smaller slice of the work than most homeowners expect, because this is a cooling town first. Winters are short and mild here, but the systems that heat Arlington homes still age out, and when they do, the decision is usually about getting through the few cold snaps without an emergency call. We handle furnace replacement, furnace repair, and AC installation across Arlington. Our technicians have up to 12 years of experience and work on nine major brands, so the system in your attic or closet is familiar before anyone touches it. Call (866) 942-9965 for a free estimate.
Why Arlington Homes Are Different
Arlington sits in the middle of the DFW Metroplex with a humid subtropical climate that runs cooling almost year-round. Summer highs of 95 to 105°F are routine, and the attic heat that comes with them does real damage to equipment and ductwork. That matters for heating too: a furnace sitting in a scorching attic or a tight closet spends years cycling through temperature swings most equipment elsewhere never sees.
The housing stock is the other half of the story. Arlington grew fast after the war and kept growing through the 1990s, so much of the city is tract housing and brick ranch homes from the 1960s through the 1990s. In neighborhoods like 76010 and 76014, we regularly find attic ductwork with insulation that has crumbled away and flex runs that have come loose. That’s often the real reason a house runs hot and the bills climb, not the condenser. Many of those ducts and furnaces were sized to 1970s through 1990s standards, and replacing a furnace without looking at the ductwork around it usually leaves the same problems in place.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Our Main Arlington Services
Furnace replacement and the two services below cover what Arlington homeowners call us about most, from a no-heat morning in January to a full system changeout in July.
AC Installation in Arlington
Installing AC in Arlington means accounting for a cooling season that starts early and ends late, with runtime hours that wear equipment down faster than the national average. We start with a load calculation, then talk through equipment options across premium and value-tier lines so the recommendation fits your house and budget rather than a truck inventory. Duct condition gets checked before anything is ordered, since loose or uninsulated runs in a hot attic can undo a good installation. Equipment is scheduled, set on a firm install date, and priced in writing before work begins. Read more about AC Installation in Arlington.

Furnace Repair in Arlington
A furnace that won’t light or won’t hold a flame is urgent here even in a mild winter, because Arlington cold snaps arrive fast and the house loses heat quickly. Repair work on these systems means diagnosing ignition, blower, and control faults, and it means looking past the furnace itself at the ductwork and return sizing that affect how the system actually performs. We work on Lennox, Goodman, Rheem, York, and five other leading brands. Same-day service is available, and estimates are free. See Furnace Repair in Arlington.

Furnace Replacement in Arlington
Furnace replacement in Arlington is usually driven by age and by the housing stock rather than by brutal cold. In the brick ranch homes built through the 1960s to 1990s, the original furnace or its first replacement is often at the end of its service life, and the ductwork around it has been baking in an attic that hits extreme temperatures every summer. Replacing the unit without addressing that surrounding ductwork leaves the house with the same hot rooms and high bills, which is why our Furnace Replacement work begins with an assessment of the whole distribution system, not just the box in the closet.
End-of-life furnace changeout
This is the straight replacement: an aging furnace comes out, a correctly sized unit goes in, and the connections, venting, and electrical are brought up to current standards.
Signs you need it
The furnace is original to a 1960s to 1990s Arlington home and has already been repaired more than once in recent seasons.
What it costs in Arlington
Replacement work typically falls within our furnace repair range of $150 – $700 for the diagnostics and site assessment that precede a quote, with the full installation priced by written estimate.
How we do it
We measure the home, verify sizing against the existing ductwork, then remove the old unit and set, connect, and test the new one before walking you through the written price.
Ductwork-aware replacement
Some Arlington replacements turn into more than a swap when the duct runs feeding the rooms have failed. This is the version of the job that fixes the cause instead of the symptom.
Signs you need it
Rooms stay cold in winter or hot in summer no matter what the thermostat says, which points at disconnected flex runs or collapsed insulation in the attic.
What it costs in Arlington
Assessing and correcting duct problems on a replacement is quoted as part of the job, with typical estimated ranges from our furnace repair figures of $150 – $700 depending on how much ductwork needs attention.
How we do it
We inspect the attic runs, seal and reconnect what’s failed, then size and install the furnace so the equipment and the ductwork work together.
What Furnace Replacement Costs in Arlington
These are typical estimated ranges for the work around a furnace replacement. The written estimate sets the final price, and it’s free.
| Item | Typical range in Arlington |
|---|---|
| Furnace diagnostics and assessment | $150 – $700 |
| Furnace repair (when replacement can be avoided) | $150 – $700 |
| Full furnace replacement | Priced per job by written estimate |
Can you replace a furnace in Arlington the same week I call?
Scheduling depends on equipment availability and the season, but most Arlington replacements are set on a firm install date within days of the estimate, not weeks. Call (866) 942-9965 for a free estimate.
Should I repair or replace an old furnace in Arlington?
If the furnace is original to a 1960s to 1990s home and has needed repeat repairs, replacement usually costs less over the next few seasons than another fix. We’ll give you a straight answer, not a push toward the bigger ticket.
Brands We Service in Arlington
Our technicians are trained on nine leading HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. We don’t claim to stock parts locally, so turnaround depends on the part and the equipment. Knowing the brand before arrival shortens diagnosis. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for HVAC Company in Arlington, TX
The ranges below are typical estimates for Arlington work. What pushes price up here is attic access, the condition of the ductwork, and how much of the system needs attention beyond the unit itself. Every price is set upfront in a written estimate before we start.
| Service | Typical range in Arlington |
|---|---|
| AC repair | $150 – $650 |
| AC installation | $3500 – $7500 |
| Furnace repair | $150 – $700 |
| Tune-up | $80 – $200 |
| Furnace replacement | Priced per job by written estimate |
Neighborhoods We Serve in Arlington
We work across Arlington, from the older central neighborhoods where original ductwork and aging equipment are common to the newer subdivisions on the edges of the city. Response times across Arlington are typically the same day for repair calls, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and a call outside dispatch hours is booked into the next opening.
- 76010
- 76014
- 76013
- Central and south Arlington ranch homes
- Newer subdivisions near the city’s outer edges
Service Area – Cities Near Arlington
Arlington sits between Fort Worth and Dallas, and our work extends into the surrounding cities. We cover Grand Prairie, TX to the east, Irving, TX and Dallas, TX further out, and Lewisville, TX to the northwest. If you’re just outside Arlington and wondering whether we reach you, call and ask; the answer is usually yes.
Serving Arlington, TX – Our Local Coverage Area
We serve Arlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Arlington
Most Arlington repair calls are handled same day, with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and calls outside those hours are booked into the next opening. Call (866) 942-9965 for a free estimate.
Permit requirements for HVAC replacement vary, so ask the city’s building department before scheduling; HOA rules may also apply to outdoor equipment. We can walk you through what the written estimate covers so you know what’s included.
We cover all of Arlington, including 76002, 76006, 76003, and 76005, and the surrounding cities nearby. If you’re unsure whether your address falls in our service area, call (866) 942-9965 and we’ll confirm.
Whether your furnace is on its last season or you’re weighing repair against replacement, we’ll give you a straight answer and a written price before anything starts. We work on nine leading brands, handle both heating and cooling, and price every job upfront. Call (866) 942-9965 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local HVAC pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Arlington Customers Say
"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."
- Robert Ziegler"Thermostat had been miswired by whoever installed it, which is why the heat strips were running with the AC. He found it in a few minutes and probably saved me a fortune on the next few electric bills."
- Daniela Reyes"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."
- Veronica Delgado